Get your BLE sensors data into Home Assistant in a snap without ESP32

 The power of OpenMQTTGateway BLE is now accessible without an ESP32 and can be installed to Home Assistant in a snap. 

Theengs Gateway can be installed as an Addon in Home Assistant thanks to the work of Mihai Ambrosie

Here is the process in a few step:

1. Open Home Assistant and navigate to the "Add-on Store". Click on the 3 dots (top right) and select "Repositories".
2. Enter https://github.com/mihsu81/addon-theengsgw in the box and click on "Add."
3. You should now see "TheengsGateway HA Add-on" at the bottom list.
4. Click on "TheengsGateway", then click "Install".
5. Under the "Configuration" tab, change the settings appropriately (at least MQTT parameters). See Parameters.
6. Start the Add-on.

Image may be NSFW.
Clik here to view.

No need of creating YAML configuration for the sensors, they are automatically created in the Devices and Entities section. From this, they can be easily added to your dashboards and automation.